Generators for home use

Sunforce 45444 600W Wind Turbine

List Price: $0.00 Price: $674.62

Product Details Weatherproof industrial-strength design with low noise fiberglass blades Charges both 12V and 24V battery banks Operates in wind as low as 4MPH

Sunforce 45455 Wind Generator 30' Tower Kit

List Price: $539.99 Price: $433.62 You Save: $106.37 (20%)

Product Details Kit includes: 4 x 6ft. x 1 5/8in. flared pipes, 3ft. x 1 5/8in. flared pipe, 3ft. x 1 5/8in. straight pipe, anchors 90 degree angle, earth staples, 1/8in. cable, 1/8in. cable clamps, 1/8in. cable thimbles, wire ties, guy wire plate stampings, hardware box, pipe box, cable crimps, plastic bag All-weather and easy to assemble Manufacturer recommends using a cement base for best performance

Customer Reviews

Easy installation. Very similar to installing an antenna
I got this tower kit when I invested in the Sunforce 44447 wind turbine. Installing the tower kit is where the time is compared to installing the actual turbine, but it is really very simple. It is a lot like putting up a field antenna, which I had plenty of practice doing in the Army many years ago. You don't need any special tools. The most specialized tool you need is a socket wrench. The manual is excellent. The following is my experience.First you secure the base to the ground - that's where the tower will stand. Then you measure where the 4 guideposts will go and drive their anchors into the ground at a 45 degree angle to the base to secure it. Take it easy the first time you drive the anchors into the ground because it's likely you'll have to move them later in the setup as I did. You lay out the pipe sections, slide the guide hangars onto the correct places (they connect to guideposts), run the transmission wire through the pipe, fasten the pipe and secure...

August 17, 2009 (USA) | Helpful Votes: 53 | Rating: 5

---